Effect of Curcumin Extract on Magnetic Property of Iron Oxide Magnetic Nanoparticles
Keywords:
Ion oxide magnetic nanoparticles, Magnetite, MaghemiteAbstract
The alteration of the magnetic field due to the compression or stamp on the metal plate, when spray with the magnetic particles on to the areas which were changed, the reaction of magnetic nanoparticles with magnetization leads to a visible line of obliterate which have been restoration. Concomitant with good magnetic properties, simple to synthesize and low toxicity of Iron oxide magnetic nanoparticles (IMNs). Thus, this preliminary study aimed to investigate the magnetic property of Curcumin extract loaded-Iron oxide magnetic nanoparticles (CMNs). The magnetic nanoparticles were synthesized using a co-precipitation and, ultrasonic cavitation method and coating with curcumin by oleic acid linker. The synthesized IMNs were characterized using Fourier transform infrared spectroscopy (FTIR), Vibrating sample magnetometer (VSM) and Transmission electron microscopy (TEM). The FTIR spectrum of Curcumin loaded-Iron oxide magnetic nanoparticles (CMNs) at 1503 cm-1 and 3370.72 cm-1 were confirmed the bonding of curcumin extract and iron oxide loaded. The UV adsorption at 424 nm was also observed. From the result of VSM measurements the Iron oxide magnetic nanoparticles were a mixture of magnetite (Fe3O4) and maghemite (-Fe2O3) The average size of CMNs was adjacent to Unloaded-Iron oxide magnetic nanoparticles (UMNs) when analyzed with TEM. However, the reduction of the saturated magnetization of CMNs was found when compared to UMNs and IMNs, along with exhibited superparamagnetic properties. The results from this study could be used as a basis for selection of Iron oxide magnetic nanoparticles to apply in restoration of obliterated vehicle identification number and evidence in litigation in further.
References
เย็นหทัย แน่นหนา. (2549). สเปกโทรสโกปี สำหรับเคมีอินทรีย์. กรุงเทพมหานคร: จุฬาลงกรณ์ มหาวิทยาลัย.
สมใจ ขจรชีพพันธุ์งาม. (2549). อิทธิพลของอุณหภูมิ เวลา และตัวทำละลายที่มีต่อการสกัดสารเคอร์คูมิน
จากขมิ้นชัน. วิศวกรรมสาร มข. 33(3) 225-236.
สันติ ภูมิยิ่ง. (2555). การสังเคราะห์ลักษณะเฉพาะและสมบัติทางแม่เหล็กของอนุภาคนาโนแม่เหล็ก
เฟอร์ไรต์เตรียมโดยวิธีการไฮโดรเทอร์มอลร่วมกับสารละลายสกัดจากว่านหางจระเข้. วิทยานิพนธ์วิทยา ศาสตรมหาบัณฑิต สาขาวิชาวัสดุศาสตร์และนาโนเทคโนโลยี มหาวิทยาลัยขอนแก่น.
สุปรีดิ์ พินิจสุนทร. (2558). วัสดุแม่เหล็ก Magnetic Materials. ขอนแก่น: มหาวิทยาลัยขอนแก่น.
Anwar, M., Asfer, M., Prajapati, A.P., Mohapatra, S., Akhter, S., Ali, A., & Ahmad, F.J. (2014). Synthesis and in vitro localization study of curcumin-load SPIONs in a micro capillary for simulating a targeted drug delivery system. International Journal of Pharmaceutic. 468 (1-2): 158-164.
Azlan Mohd. Zaili, M., Kuppuswamy, R., & Harun, H. (2007). Restoration of engraved marks on steel surfaces by etching technique. Forensic Science International. 171(1): 27– 32.
Barick, K.C., Ekta, E., Gawali, S.L., Sarkar, A., Kunwar, A., Priyadarsini, K.I., & Hassan, P.A. (2016). Pluronic stabilized Fe3O4 magnetic nanoparticles for intracellular delivery of curcumin. RSC Advances. 6(101): 98674–98681.
Dang, F., Kamada, K., Enomoto, N., Hojo, J., & Enpuku, K. (2007). Sonochemical synthsis of magnetite nanoparticle in aqueous solution. Journal of the Ceramic Society of Japan. 115 (1348): 867-872.
Gnanaprakash, G., Mahadevan, S., Jayakumar, T., Kalyanasundaram, P., Philip, J., & Raj, B. (2007). Effect of initial pH and temperature of iron salt solutions on formation of magnetite nanonparticles. Materials Chemistry and Physic. 103 (1): 168-175.
Kandpal, N.D., Sah, N., Loshali, R., & Prasad, J. (2013). Co - precipitation method of synthesis and characterization of iron oxide nanoparticles. Journal of Scientific & Industrial Research. (73): 87-90.
Kitture, R., Ghosh, S., Kulkarmi, P., Liu, X.L., Maity, D., Patil, S.I., & Kale, S.N. (2012) Fe3O4- citrate-curcumin: Promissing conjugates for superoxide scavenging, tumor suppression and cancer hyperthermia. Journal of Applied Physics. 111(6): 064702.
Kuppuswamy, R., & Senthilkumar, M. (2004). Restoration of vehicle identification number. Journal of Forensic Identification. 1 (54): 13-21.
Mahdavi, M., Ahmad, M., Haron, M., Namvar, F., Nadi, B., Rahman, M., & Amin, J. (2013). Synthesis, Surface modification and characterisation of biocompatible magnetic iron oxide nanoparticles for biomedical application. Molecules. 18 (7): 7533-7548.
Medeiros, S.F., Santon, A.M., Fessi, H., & Elasissari, A. (2011). Stimali-responsive magnetic particles for biomedical application. International Journal of Phamaceutice. 403 (1-2): 139-161.
Mozayani, A., & Noziglia, C., (Eds) (2011). The forensic laboratory Handbook:Procedures and practice. 2 nd ed. New Jersey: Humana Press.
Pattayyil. (2016). Curcumin coated magnetite nanoparticles for biomedical applications. United States Patent. US9468691 B2: 6.
Ramimoghadam, D., Bagheri, S., & Hamid, S.B.A. (2014). Progress in electrochemical synthesis of magnetic iron oxide nanoparticles. Journal of Magnetism and Magnetic Materials. (368): 207–229.
Tran, L.D., Hoang, N.M.T., Mai, T.T., Tran, H.V., Nguyen, N.T., Tran, T.D., & Nguyen, P.X. (2010). Nanosized magnetofluorescent Fe3O4–curcumin conjugate for multimodal monitoring and drug targeting. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 371 (1-3): 104–112.
Treptow, S. (1997). Handbook of Methods for the Restoration of Obliterated Serial Numbers. Chicago : Public Domain Nat’l Aer onautice&space Admin.
Tsukimura, K., Sasaki, S., & Kimizuka, N. (1997). Cation Distributions in Nickel Ferrites. Japanese Journal of Applied Physics. 36 (Part 1, No. 6A), 3609–3612.
Wu, W., He, Q., & Jiang, C. (2008) Magnatic iron oxide nanoparticles: synthesis and surface functionalization strategies. Nanoscale Research Letter. (3): 397-415.
Zhang, L., He, R., & Gu, H.-C. (2006). Oleic acid coating on the monodisperse magnetite nanoparticles. Applied Surface Science. 253
Downloads
Published
How to Cite
Issue
Section
License
The articles that have been published are the copyright of Rajabhat Dhonburi University.
The opinions expressed in each article in this academic journal are the personal views of the respective authors and are not related to Rajabhat Dhonburi University or any other personnel within the university. However, all responsibilities for the entire content of each article belong to the respective authors. If there are any errors, each author will take responsibility for their own article independently.
